Feather sound absorbing wall Board Joint methods

Help joint compound expansion from feathers, sheetrock at all joints smooth keeps, invisible seams. Any Sheetrock at covering the Department entirely Panel drywall tape and joint compound combination is required. Unobtrusive and well done, joint paint; has a vertical line extending along the length of the sequence of your wall and badly run. Blur is the main difference between the two extremes are used in application technology joint compound. Feathering is thin, compounds, and seams from the one applied art, is a mix. Extend the compound until each feather, either direction, and further layers 2 feet further, see you there seams around and a very gradual increase is difficult to. Difficulty level: Moderate1

Any Sheetrock at spreading the thin layer of compound along the drywall tape cover joint fitting at all. Applying bonding material also possible first as when compounds kept please.

2

Compound materials with a drywall knife flat wall to hold knives draws a second time. Tape than it is composite leave any Sheetrock at all.

3

Tape outside edge onto tape compounds under more pressure and compounds, and knife and press. It is on the edge of creation process at the edge of the compound from the center of the tape always thinning creates the edge.

4

Use the same process on both sides of drywall tape blur. With horns to soften the outer boundary of the tape, and inside the moving corner edge's.

5

Switch to the next big drywall knife, then repeat together composite applications. Soften the tapered edge often jointly from approximately 1 maintains that applying compound blur each edge until the 1 / 2 to 2 feet,.

Read the following photo credit Jupiterimages/Photos.com/Getty;:

View the original article here