How to make drop-down ceiling panel

 You must gain access to the hidden wiring ceiling panels are removed. One or drop ceiling should replace the panels up attractive---in may appear. You may easily see from the drop-ceiling panel removal is done in certain ways. Regardless of you kind of drop-ceiling panel is removable for cleaning or replacement can be. Or ceiling panel sometimes brushed trapped in check but nothing is damaged. Difficulty: moderate EasyFolding ladderAssistant (optional) 1

Ladder stand underneath the Panel down. Promoted from the second step. Increase the chances of injury exceeds this height ladder becomes unstable.

2

Place the Panel surface to the Palm of your hand. Located near the edge of your hand. Check whether or not to maintain the level of the Panel from your hands. Simultaneously with both hands.

3

Remove the Panel until it is perfectly clear framework.

4

Move the Panel portion forward or backward. In narrow terms, so hold it flips Panel.

5

Faces are narrow, so spin the Panel next to. Panels are square if you go to step 7. Otherwise, proceed to step 8.

6

Panel corners, corner opposite the framework onto the vertical run Panel. You must form a line between the corners of the Panel at the bottom against a framework.

7

Short ends execution framework long sides placed Panel in parallel.

8

Hole in the Panel to bring back. It low on the Center and maintains the Panel. Lower panel until the framework is released it.

9

Panel on a soft surface, ladder low or hand off the Assistant. So to reuse it if you can avoid damaging the panels.

10

Climb the ladder to avoid slipping and falling accidentally holding in both hands.

Photo credit Thinkstock Images / ComStock / Getty Images; read the following:

View the original article here